Full-feature PCB Services Located within Shenzhen

PCB Layout Advisors are offered to help you to extend your resources and in addition increase the speed of your PCB prototyping time span.

Simply just hand in some elementary design important info, and we will get you an estimate for the work. Allow us to do the board layout, and we’ll moreover place your circuit board order to suit your needs. That’s right, you give us the schematic, board outline, & BOM (with component datasheets), we shall give you the complete design file and finished vacant boards. The boards include the origin design file, so you and your team will be able to take up from where we ended, make any necessary corrections, and re-order, when asked.


Our PCB Layout Services Consist of:

  1. Presenting experience for the physical layout of your accomplished schematic design. Working from a CAD software tool design data file, or perhaps a netlist are strongly sought after.
  2. Doing the physical layout of your design in 100 % free, fully-functional PCB design software tool.
  3. During fabrication, you can add any extra services (electrical test, assy, etc.).
  4. Offering to you the design data file plus your concluded Printed circuit boards.

Take Note: This solution DOES NOT Encompass building schematics for your design or revealing elements for your List of materials. The schematic design and components specs portions of the design process count on a deep expertise in the design constraints for the Printed circuit board prototype project.


Minimal required is a schematic design or a netlist file:
Schematic design file should be in one of the following formats:

PCB123 (recommended)
OrCAD Schematic
Netlist file (In Protel or perhaps Tango format)

The schematic has to be whole, and determined by the buyer, previous to PCB design launch.
In the event you supply a netlist, the schematic and the netlist must agree.

Bill Of Materials

We need that you specify every individual part for your design. We don’t know your tolerances and application parameters as well as you do.
Particular footprint specifics for every single part is additionally desired. Quite a few parts come in a selection of foot prints. A whole datasheet for every single component is the most successful option to offer this demand.

If you present us with a netlist, the schematic and the netlist are necessary to reach a decision .

Board Skeleton

It is easy to get the board outline with PCB123, and share that with us straightaway(Highly recommended).

You can easily present IDF file from Mechanical CAD tool; we’ll transfer that details directly onto PCB123. (Identify that: A couple of CAD tool IDF files will not be able to be imported)

Prototype Printed circuit board Assembly


We’ve distinct expertise in serving up prototype board assemblage with surface-mount (SMT), thru-hole (THT) as well as joined technology parts.

Quick-turn and low-cost Prototype Assy Services

Our Prototype PCB Assy is a proficient service that enables us to take into account elaborate designs, prepare them for assemblage, and test them out without your being forced to be concerned with PWB assemblage quality. The prototype printed circuit board assemblage portion of our factory has a different layout design that permits the adaptable usage of both semi-automatic or fully automatic and manual components-loading stations. Our team is qualified and veteran in maintaining fine-pitch parts as well as BGAs for high-density FR-4 circuit cards. Our group is in a position to producing prototype PCB board assemblage quantities of 1-25 PCB boards.

Turnkey board assembly is our foremost task, even at the prototype level. We have occupied authority engineers and established efficient directions for every move of the PWB making the process so our buyers can easily make use of our circuit board prototyping, parts sourcing and circuit board assy services. Furthermore, we offer a partial Turnkey service that gives us the capability to construct component kits depending on the client’s specifications.

Our PCB board assembly service features the purchase of components. This lets you concentrate on what you do best: layout design. We have a devoted sourcing crew that negociate with many different companies and marketers to invest in materials as per consumer requirements and wraps up these buying routines in a most effective manner. We now have reliable processes for best selection of packaging (cut tape, tube, bulk, etcetera.) to minimize the sum total. Plus, we’re able of cross-referencing elements and searching for hard-to-find and old elements. Shoppers can be rest assured that when we replace components they are good quality as we only use the component quantities and producers laid out in the BOM. We won’t alter your original layout design. Element substitutions take place only with your approval.

The last turn-key cost is comprised of assy labor costs, bare circuit board rates, and materials cost. On our web site, you can achieve an quick online price quote for prototype PWBs and assembly. It will give “PCB + Assembly ” costs quickly. Prices are based on the prices of Digi-Key, Mouser, Avnet, Arrow, Future, Newark, or a specific provider.

We know the importance of quick delivery. The sooner the components are bought, the sooner we can start circuit board manufacture. We comprehensively evaluate engineering inquiries and related components worries with our customers ahead of establishing PCB board assembly. The average time consumed for turnkey circuit board assy is 14 days, which may be further decreased in case there are no hard-to-find elements or perhaps documents problems.

For a prototype assembly price quote, please send the below files to us:

Bill of Materials listing
Gerber files
Quantity which is required

Our company is qualified to take care of the whole process, including the sourcing of all the parts (circuit card and parts), online order monitoring and their management, PCB assembly, quality control and delivery.

Now we have pros to give quick turn-around, prototype circuit board assembly with surface-mount (SMT), through-hole (THT) and mixed-technology parts. Our productive and swift prototyping service group can easily assemble PCB boards in just A day.

Low-volume Electronic Circuit Board Assy

We offer you short-term circuit card assemblage services, determined by your wants, with facilities in China to attain the bottom cost for our customers.

Our Low quantity PC Board Assembly Services Contain

BOM Creating
Design for Testing
Design for Producing
Auto-routing & Hand-routing

Small-run PC Board Assembly

We are a adept, electronic contract manufacturer with a focus on small-run, turn-key, electronic circuit board assembly services. The turn-key service incorporates Design for Manufacturing and Design for Testing services.

Design for Manufacturing Service

In order to avoid one or two engineering issues that may well decelerate the production operation , which could probably bring about supply delays, we make use of a Design for Manufacturing service which functions as a approach to inspecting the quality of the shopper’s engineering documents for example , Gerber files, list of materials, assy drawings, and circuit diagrams. Additionally, it will panel the printed circuit boards, examine your components list to check its accuracy prior to the parts being ordered, and advise a solder mask to achieve high output rates. We have the capacity to deliver price reductions to its shoppers caused by including its DFM service into its electronic circuit board assemblage.

Design for Testing Service

To help your board testing procedure and give advice on where you should put test points across your circuit board, we utilize a Design for Testing service. References relating to probe types, fixtures, and testing limitations are available by this service. The DFT service will authenticate that your testing demands, problem discovery processes, troubleshooting instructions, along with other references are well-designed.

Before-production Test Boards

To prevent yourself from the challenges and increased expense of reworking, we will at first make a select few of printed circuit boards and ship them to you for exam before making the entire order. On validation of an order for full-scale manufacture, we are going to examine all manufactured boards, and verify the ball grid array and the quality of the zero-lead component assembly using an X-ray inspection machine. circuit cards will never be sent until all aspects of concern have been tackled.

Added Methods to Reduce Your Expenses

We take delight in preserving long-life partnerships with its buyers. We present extra financial savings to our long-run users by not billing additional fees for NRE and stencils on future orders. On top of that, we also pass around cost per component discounts to our consumers due to the fact we work with component suppliers who provide us volume discounts. Our international distributor partnerships let us to reach good quality parts at cheap prices. We make every effort to ensure that our clients get the finest quality which a turnkey circuit card service company can give.

How One Can Acquire a Quote

It is possible to place a low-volume order and obtain a electronic circuit board assy quote. Just give your BOM listing and also Gerber files to us. We will respond speedily.

Turn-key Electronic Circuit Board Assemblage

Ever since its founding in the year 2001, We have become a trusted electronic contract manufacturer(ECM) to satisfy the need for fast turnkey circuit card assemblage solutions.

100 % and Partial Turnkey

PC Board Assembly Solutions Feature:

  • Rapid turn-around
  • Prototype and / or Production Accepted
  • Bare Boards, Elements & Assemblage
  • Quick Online Quote

Turn-key Printed Circuit Board Assemblage Solutions

We are great for offering completely full turnkey and partial turn-key PCB board assy services. For full turn-key, we cope with the complete process, consisting of preparing of PCB boards, procurement of parts, order tracking over the internet, continual checking of quality & final assembly. Whereas for partial turn-key, the purchaser can supply the PWBs and certain parts, and the left parts will be addressed by us.

Tips on how to acquire a quote for Turn-key circuit card assembly solutions?

PWB Online Quote

A Prompt PCB board price is usually quoted after choosing of a couple of options. Please click PWB price estimator to acquire a quick Quote for circuit card fabrication.

Printed circuit board Assy Quote

This is an additional instant quote for the cost of labor for circuit board assemblage. Click circuit board Assemblage Quote to get an instant quote for Printed circuit assembly.

BOM Pricing:

In order to receive a BOM price within 1 day, email the BOM file to [email protected] Make sure to provide all details such as quantities, reference designators, and manufacturer name and part NO.

Our Assy Capabilities:

Different types of Assemblage

THD (Thru-Hole Device)
SMT (Surface-Mount Technology)
SMT & THD combined
2 sided SMT and THD assemblage

Order Quantity Allowed

1 to 5,000 boards


Passives parts, smallest size 0201
Fine pitch to 8 Mils
BGA, uBGA, QFN, POP and Zero-Lead chips
Connectors and terminals

Component Package

Cut tape
Tube and tray
Loose parts and bulk

Printed circuit board dimensions

Most minuscule dimension: 0.2″ x 0.2″ (5mm x 5mm)
Biggest dimension: 15″ x 20″ (381mm x 508mm)

Supported Circuit card shape

Slots and Cut outs
Elaborate and Unusual

PCB sort

Rigid FR-4 boards
Rigid-Flex boards

Assemblage procedure

Leaded process
Zero-Lead (RoHS)

Design data format

Gerber RS-274X, 274D, Eagle and AutoCAD’s DXF, DWG
BOM (Bill of Materials) (.xls, .csv, .xlsx)
Centroid (Pick-N-Place / XY file)

Sales & help support

Cell phone
Live chat at working time period
Calculator web page for printed circuit board and assembly

Testing Procedures

Visual Inspection
X-ray Inspection
AOI (Known as: Automated Optical Inspection)
ICT (Known as: In-Circuit Test)
Functional testing

Turn-around time frame

1 To 5 days for just PCB board assy
10 To16 days for completely full turn-key PWB assembly

Low Priced and Fast PWB Parts Purchase

Hard-to-Locate Components| No handling fee |Global integrated circuit Sources| PCB Assy Parts

We have build a components sourcing and procurement panel to tackle the shipping and purchasing of circuit board assemblage components. It works on a quality-controlled, well established procurement strategy that guarantees great electronic parts sourcing. This has permitted us to present board assembly services at possibly the most reasonable price in the world-wide, electronic contract manufacturing (ECM) business.

Excellent Components

We purchase electronic parts of high quality from authentic channels and distributors which will certainly reassure the best value parts for our buyers. In accordance with the buyer’s requirement, furthermore, we’ll obtain parts from suppliers advised by the consumer. We keep clear of swapping components or using a supplier that’s not acceptable to the buyer. We have developed long lasting partnerships with the greater part of electronic part providers which include Avnet, Digi-Key, Arrow Electronics, Farnell, Future Electronics, Newark, Samtec, Mouser Electronics,, and many others. As we procure parts in high volume, we can give fabulous charges to our clients.

Difficult-to-Locate Components Seeking

Our company has the opportunity to buy difficult-to-find, outdated, and extraordinarily long lead-time components. Gradually, we’ve built a thorough network of international sources, that has made it easier for us to acquire Integrated circuits made in Japan, Korea, Taiwan, and various other areas all over Asia. In case a replacement or cross-reference component is needed, we ask for the customer’s authorization very first.

Lead-Times and Costs

Almost all of the component orders can be fulfilled in about 5 to 7 working days from the first order day. We make use of barcode and RFID labeling to hasten the purchase and stock management procedures. Precise stock-in-hand details in our local warehouse facility can be attained by employing this type of state-of-the-art automation systems. Furthermore, we undertake thorough quality inspection for all of the components before they are stocked in warehouse.

Our in-depth and effective sourcing system has allowed us to supply an cheap service to our consumers without any handling costs. Our goal is to make PC board manufacturing and assy our occupation and make it possible for our customers to specialize in electronic engineering and circuit layout and design.